20mm Round Ribbed 12° Angled Insert, 1.5-2mm

These 20mm round ribbed tube inserts are designed to provide a clean, secure finish for hollow round tubes and legs. The head on these inserts is angled and this particular insert is pre-set at 12 degrees and would generally be used as a foot for angled chair legs.  Although our tube inserts come with a a range of angles, it's also worth considering our 'Full Dome' inserts, as the pronounced dome on these, is desigend to work with any angle.

If it's more of an angled foot you're after, then we have full domed and angled options or we also have a range of Tiltserts which may work better for you.

The head diameter is designed to sit flush with the outside of the tube whilst the shank has flexible horizontal ribs to suit a multitude of tube walls, in a range of both metric and imperial sizes.  Thanks to the flexible lateral ribs running around the shank of the insert, they're generally suitable for tube wall thickness of between 1 to 2mm metric (14-20 gauge imperial) but this particular insert foot is for a 1.5-2mm wall thickness. 

Manufactured from durable LDPE plastic, they are commonly used as protective end caps, tube feet, and finishing plugs across furniture, fabrication, and light industrial applications. They're designed to retain themselves inside tube, with the head sitting over the outer ends of the tube or pipe, sitting flush with the outside circumference of the tube and providing a neat finished appearance.

Key Features:

• Fits hollow tube or pipe with a 20mm outer / external dimension
• Manufactured from resilient LDPE
• Ribbed design for secure fitting
• Helps protect floors from exposed tube ends, reducing noise and marking
• Available in multiple colours
• Designed primarily for indoor use but can be used outside but not UV stabilised as standard
• Angled head, pre-set for 12° (degrees)

Technical Information:

• Tube or pipe shape: Round
• External tube size: Ø20mm
• Tube wall thickness: 1.5-2mm
• Suggested internal fit: 16-17mm approx. (different factors affect this, including coatings, weld lines and tolerance)
• Material: Low-Density Polyethylene (LDPE)
• Fitting type: Push-fit ribbed insert

Suitable for:

• Angled legs on office and workshop furniture
• Foot bungs for chairs and tables
• Plastic stoppers for Round hollow tubes and pipes
• Feet for display systems
• Post caps for gates and railings
• Tube end caps for light fabrication projects
• Protective tube ends for finishing
• Ribbed knock-in inserts for POS and shopfitting

Tube inserts are always listed the same way that tube is listed because the head of the insert needs to marry up with the outside edges of the tube.  They often come in a variety of wall thicknesses and gauge sizes but if you're unsure on fit, you can click the 'Request Sample' button, or for help measuring your tube, try out this useful sizing pdf.

If this isn't quite right for your application, check out our other inserts for round tube here and if you're not looking to plug the end of a piece of hollow tube and instead after a generic hole plug, then maybe one of our covers caps or panel plugs will work better for you.

  There are currently no reviews for this product. Why not submit a review?

There are currently no FAQs for this product. Do you have a question? Submit FAQ

 Tube Fittings Buying Guide