Ø30mm Bolt Down Metal Adjustable Foot | M8x16

A 30mm diameter adjustable metal foot with an M8x16mm thread, designed so you can level and support heavy items on uneven floors.  You'd typically consider using a metal foot like these with a low profile base if you don't want a bulky plastic foot and the M8 feet are always going to be 1.25mm pitch, which is generally considered the industry standard for M8.

If you're intending on using these in hollow tube, pipe or box section then you will want a threaded tube insert or if you're intending on using these underneath wooden frames or carcasses, then you'll want a T-Nut or a D-Nut.

You might also want to use a plastic cup which has been specifically designed for use with these feet, if for instance you want to cushion the base or reduce noise and you can find protective floor cups here.  If you find this foot doesn't suit your application for whatever reason, then you'll hopefully find what you're looking for from our comprehensive range of feet and castors.

Technical Information:

• Base Diameter: 30mm
• Thread Form: M8 x Industry Standard 1.25mm Pitch
• Exposed / Available Thread: 16mm
• Base Height to start of Thread: 11mm
• Mounting Hole: 4mm
• Hole Spacing: 24.3mm
• Hex Dimension: 13mm Across Flats
• Compatible with Threaded Inserts including D Nuts and T Nuts
• Material: Sheet Steel with Steel Screws - Zinc Plated

Suitable for:

• Levelling off furniture
• Height raising
• Feet for shopfitting
• Replacing castors
• Industrial machiners
• Commercial kitchens
• POS and retail
• Electronic and server racks

Useful Accessories & Related Products

• Protective Plastic Floor Cups
• M8 Rigid Feet
• M8 Tilt Feet
• M8 Anti Vibration Mounts
• Screw In Glides
• Square Tube Expanders
• Castors & Wheels
• Load Rated M8 Feet
• M8 All-Thread Pre Cut Studs
• T-Nut & D-Nut Threaded Inserts

If this doesn't quite fit what you're needing, then you can explore our full range of feet and castors where you'll find a variety of other options including stainless threaded feet, chrome capped feet, anti vibration mounts, furniture glides, wheels and even self assembly feet in the form of sockets and pre-cut all thread studs, meaning you've no limitations to the length you can go.

If you decide you don't want a visible thread and you're using hollow tube or box section, then we also have a range of table leg adjusters and tiltserts but with the range of feet available being so  extensive, then please contact us if you can't find what you need.

  There are currently no reviews for this product. Why not submit a review?

There are currently no FAQs for this product. Do you have a question? Submit FAQ