288cm High VL 1x 1200mm Bay Compression Shelving

Our VL Shelving range is designed to offer a stylish storage / shelving system but also doubles as a statement room divider.  Your can mix it up with wood or metal shelves and we also have shelf mounted cabinets too, which can match your wooden shelves.  With it being modular, you can configure it however you wish, with the option of different heights and different width bays, which you can utilise on the same unit to fill the space as you wish.

To save you having to compile your own shopping list and in effect build your own shelving system, we've listed some standard kits in some of the more common sizes - this particular listing is a complete system, giving you 1 single bay, with 6 wooden shelving levels being 900mm wide.

Images of the metal framework can be found in the gallery and you can click on the images of the shelf finishes, to enlarge them but you can also request a swatch too, if you want to get a small sample of the wooden shelf finish posted to you.

This particular kit is designed for ceiling heights of 288 to 298cm but there are other height range options available, as well as an option of 600 or 900mm wide bays!

This particular kit shown in the image, includes:

2 x Upright Terminal Extrusions, designed to fix 288 to 298cm in height

7 x Horizontal Support Bars at 1200mm wide, to give you 6 shelf levels - to accommodate :
7 x 18mm Thick Shelves that sit 31cm Deep, in a choice of finishes

1x Fixings Pack - see Techncal Data tab for details

Obviously you can buy all these product separately, elsewhere within this section - to build up your own configuration, if for instance you wanted :

a) Different Heights (Choice of 3 available, 238-248cm / 268-278cm or 288-298cm)
b) Multiple Bays (This is a single bay but you can use intermediate uprights to create a run)
c) Wider Spans (Choice of 3 available, 600mm / 900mm or 1200mm)
d) Different accessories, such as Steel Shelves or Cabinets

VL is a modular and bifacial frame made of thin metal profiles and interspersed with wooden shelves. It is fixed to the ceiling and the floor. It acts as an elegant partition between areas, creating a permeable filter between the different rooms. Its versatility allows it to be also used as a partition between living and night spaces, while the modern and minimal design is suitable for all contexts, both working and domestic.

As a compression system, it's available with 3 fixed extrusion lengths, to fit varying room heights and you also have 100mm of adjustment via the clamping screw.  However, in instances where you have a lower ceiling then it is possible to cut down the aluminium profile to fit.  Before cutting, it is necessary to remove the feet which are fixed to the profile using 4 screws. After removing the screws, you can pull and remove the feet before cutting the profile. However, please be aware that in doing so / any modifications will void the warranty, so please double check your measurements first!

  There are currently no reviews for this product. Why not submit a review?

There are currently no FAQs for this product. Do you have a question? Submit FAQ

• Bay Width Dimensional Data
• Upright Extrusion Profile
• Configuration Diagram
• Included in the Kit
• Fitting Instructions