M10 to M12 Bolt Head & Nut Cup / Washer (UV)

These hexagon screw cover caps are designed to encase the screw and conceal it with a push in top. Expertly manufactured in Germany for ultimate precision. Multicolored combinations available.

What sets these bolt head cups and secure cover caps aside from the basic options available from standard retailers is that the material is a Polypropylene + UV stabiliser combination, meaning that they can be used outside and withstand the UV effects (from sunlight) that would otherwise degrade the material in a short space of time, as it does with standard Polypropylene bolt head cups and cover caps.

Although these parts are often bought as a base and a cap, we list them separately as often customers choose to take them in different colours, to achieve a 2-tone finish.

Can’t see what you’re looking for? We show standard colours & finishes where possible, but if you require a colour not listed in the drop-down, do get in touch as we may well have added it since.
 

  There are currently no reviews for this product. Why not submit a review?

Frequently asked questions about this item are shown below. Do you have a question? Submit FAQ

Q: Will these take a M10 bolt with 16mm nut. Thanks

A: Hello. This washer was designed for industry standard M10 – M12 bolts and so while it should be suitable, we cannot guarantee it and so I would recommend ordering a FOC sample to check for a suitability. You can also find a dimensional drawing on the product page, which you may find helpful. I hope this assists. Kind regards, BPF

• Technical Drawing
• Material Data Sheet