< Previous Item 11 of 23 Next >

27mm Jaw Screen Bracket, Multi-Hole

2 no. csnk holes & 1 no. M8. Bracket / sold singly

(2 Customer Reviews)

Please choose your preferred option and enter a quantity below:

		Dark Grey	F-10010-027-004-202	811 In Stock
		Silver/Alu Ral 9006	F-10010-027-009-202	1,609 In Stock

Pack sizes optional on stock items, which you can order in any quantity. Prices exclude VAT

Individual item(s)	Pack(s) of 4	Pack(s) of 20	Pack(s) of 100	Pack(s) of 500
£3.04	£11.16	£51.72	£243.38	£1,166.20
(£3.042 each)	(£2.790 each)	(£2.586 each)	(£2.434 each)	(£2.332 each)

Enter total number of units (items / kits / pairs) required - not how many packs

QTY

Other ways to order:

Call: 01295 678614

Email your PO to: orders@bpfonline.co.uk

Explore other cost-saving possibilities below...

Account Login Newsletter Volume Enquiry

Description Reviews (2) FAQs (1) Drawing

These Metal Brackets have been designed to clamp onto the backs of desks to give support to desk-mount screens, via a 10mm Diameter upstand. They are produced in Steel and are powder coated to achieve a consistent quality finish.

This particular bracket has been designed with versatility in mind and as such, comes as standard with 2 countersunk holes, ideal for screwing direct to a surface and one threaded M8 hole, should you prefer to use a clamping device.

We do offer a range of stock clamping methods such as Handwheels and Clamp Pads and we show standard colours & finishes where possible but these are constantly changing so if you require a colour not listed in the drop-down, speak to us as we may well have added it since.

Why not submit your own review?

Submitted by Mr ALLISTER MULLIGAN (1/09/2023)
Good quality product at a good price. Fast delivery. Recommended.

Quality
Accurate Description
Performance/Suitability
Value for money
Overall Score	5.0 / 5

Submitted by STEVEN WILLIAMS (9/07/2020)
NO COMPLAINTS AS ALWAYS

Quality
Accurate Description
Performance/Suitability
Value for money
Overall Score	5.0 / 5

Frequently asked questions about this item are shown below. Do you have a question? Submit FAQ

Q: What are the dimensions of the bottom plate (the plate with the pre-drilled holes), as I can't see this from the Blue 'View Drawing' button?

A: We've physically measured one of these and the bottom plate that fits under the worktop, will extend 54mm fully pushed on under the top and it's 40mm wide giving you a surface area to accommodate of 54x40mm. Obviously you don't need to push it all the way on if you don't want to, as the back of the first single threaded hole is 35mm on and the 2 countersunk through holes are only 23mm on, from the worktop edge.

VIEW DRAWING