Ø17mm Adjustable Threaded Foot, M6x12mm

These 17mm diameter adjustable feet are one of many foot options we have available, with an M6x12mm Thread and as with all our M6 feet, they will have a standard 1.00mm pitch.  They're designed to screw into furniture and framework, to give you a level of height adjustment, which will be variable depending on what thread length you go for. 

If you're intending on using these in hollow tube, pipe or box section then you will want a threaded tube insert or if you're intending on using these underneath wooden frames or carcasses, then you'll want a T-Nut or a D-Nut.

If you're looking to something more heavy duty, if for instance you're intending using them under heavy machinery or conveyor systems, then you might be better off with one of our load rated feet, which also come with Stainless Threaded options. 

Key Features:

• Small compact foot with a 17mm Convex Base
• Manufactured from resilient PPCP
• Standard M6 Thread with 1.00mm Pitch
• Raises furniture and frames off the floor
• Pozi drive on underside of foot for rapid assembly
• Designed primarily for indoor use but can be used outside but not UV stabilised as standard

Technical Information:

• Base Diameter: 17mm Hexagonal
• Thread Form: M6 x Industry Standard 1.00mm Pitch
• Exposed / Available Thread: 12mm
• Base Height: 8.5mm
• Compatible with Threaded Inserts including D Nuts and T Nuts
• Material: Polypropylene (PPCP)

Suitable for:

• Levelling off furniture 
• Height raising
• Feet for shopfitting
• Replacing castors
• Retro ftting and repairs
• School furniture
• POS and retail

If this doesn't quite fit what you're needing, then you can explore our full range of feet and castors where you'll find a variety of other options including stainless threaded feet, chrome capped feet, anti vibration mounts, furniture glides, all-metal feet and even self assembly feet in the form of sockets and pre-cut all thread studs, meaning you've no limitations to the length you can go.

If you decide you don't want a visible thread and you're using hollow tube or box section, then we also have a range of table leg adjusters and tiltserts but with the range of feet available being so  extensive, then please contact us if you can't find what you need.

   Why not submit your own review?

Submitted by richard hopcroft (6/11/2018)
The item was a near enough copy of the original item from China and did the job perfectly as one original was missing on a side table.

Quality
Accurate Description
Performance/Suitability
Value for money
Overall Score	5.0 / 5

Frequently asked questions about this item are shown below. Do you have a question? Submit FAQ

Q: Hi, I got some 25mm Serrated Foot from you after you sent me a sample to make sure the thread pitch was right. It worked great with a 1.25mm pitch. However I now realise I could do other specs as well: M6-25mm or shorter / 1.5mm pitch M8-25mm / 1.5mm M8-25mm / 1.75mm pitch Can you give me the suitable product references? or send more samples? Thanks for your help

A: Hello. We do not list the thread pitch as it differs depending on the product type & size. However, you can see our range of Rigid Adjustable Feet here, sorted by Thread size: https://www.bpfonline.co.uk/search.asp?catid=10964 – There are filter options in each category to help you narrow your search. Samples of feet are also available if you wanted to check for pitch size / suitability. Kind regards, BPF