2000w x 600d Wooden Top, 25mm Thick

2000mm wide x 600mm deep quality 25mm thick MFC top (Melamine Faced Chipboard) with 2mm thick ABS (Acrylnitril Butadien Styrol) Edging and 2mm Radius all round.

Primarily designed for use with our K / X Series Desk Frames, these tops will generally come untemplated as standard, meaning you can use these with other table frames/bases. If you're buying a frame off us at the same time, the top will be templated to suit so it will have fixing holes, so you can easily assemble with the frame. However, if you're not buying one of our frames, then we regret that we can't offer you the templating service, as this is purely for customers buying our frames/desks.

We also offer customers buying the whole desk or table from us (frame + top), the option to have cable management holes cut. All we ask is that you advise us at the time of order and email us a drawing with desired location - the actual location may vary slightly, if for instance the hole interferes with fixing plates, or structural beams.

It's for these reasons above that we generally prefer to make tops to order but from time to time we do have tops listed as being in stock but please be aware that these are likely to have fixing holes on the underside, as they've usually been made to suit one or more of our frames.  They're still brand new but you need to be aware that if you're fixing to your own desk frame, there's likely to be redundant holes visible, obviously only from the underside!

If you have ordered a stock top but specifically want this with NO HOLES, then please let us know via the Spencial Notes / Comments section as you go through the order process and we will ignore the stock status at time of order and have it made to order for you at the mill, or we can physically check the stock top for you, to let you know the situation regarding holes.

We've only listed the most popular sizes/colours but obviously other size tops can be manufactured specially and in different finishes. Further technical information may be available if you click the Technical Data tab below, just next to the Photo Gallery.

As with all our tops, we cost them up to cover secure pallet shipping but we are happy to pass on the freight saving to you, if you prefer to collect from our Banbury showroom.

   Why not submit your own review?

Submitted by Daniel (18/01/2021)
Having looked for a desk for months on end of this size, I finally opted to go with Box15. I have to say not only was I given several different options of finish but also of cuts. The size and quality of this alone was enough for me to purchase. Samples were necessary when choosing colours, and the company were more than happy to provide these, despite me being a private buyer. Once having chosen this they were also kind enough to then provide service repeatedly after decision to help create the specification I wish and communicated with their wood mill to make the required cuts for any equipment that I required. Whilst originally, I thought that the delivery service on a pallet may have been excessive, I have to say that when it came, I was more than pleased to see it delivered in immaculate condition and ready to put together - and would pay it again. Best purchase I have made all year and an incredibly happy customer.

Quality
Accurate Description
Performance/Suitability
Value for money
Overall Score	5.0 / 5

There are currently no FAQs for this product. Do you have a question? Submit FAQ

• X / K Series Drilling Reference

 MFC Desk & Table Top Range