< Previous  Item 57 of 64   Next >

80mm Two-Tone T/W, Unbraked

nylon rimmed, 80kg load rating
 Grey/Silver A-08030-080AN-009-297 In Stock More Info   EXTRA 25% Off*
* % shown will be reduced on the next page, subject to availability
Enter number of individual items/kits required in the 'Add to basket' box below
Pack sizes below are optional on stock items, which you can order in any quantity
Web Only Quantities InfoWeb or Telephone Info
Individual item(s) Pack(s) of 20 Pack(s) of 100 Pack(s) of 250 Pack(s) of 500
£1.24 £22.32 £105.40 £248.00 £465.00
£1.49 incl VAT (£1.116 each Ex VAT) (£1.054 each Ex VAT) (£0.992 each Ex VAT) (£0.930 each Ex VAT)


Enter total no. of individual items required (or kits if applicable) - not packs

These Stylish Twin Wheel Castors have a Two-Tone Finish and come in wheel sizes 60mm, 75mm & 80mm and in the cases of the 60 & 75's - in a couple of different stem heights.  All have the option of Brake or UnBraked and we have a specific set of fittings including Threaded Pins, Plates, Friction Fit etc. available for this range.

The boss on these body's measure approx. 8.2 Diameter x 28.9mm Deep, although with castors always being notoriously difficult to match up, we'd always recommend you use the filter options when you're within the list view and tick Castor + Fixing, to ensure you only see the options that are specifically designed to be compatible, otherwise you run the risk of picking a non-compatible fixing!

With any Castor or Wheel - they're notoriously difficult to match up, as there are so many manufacturers out there and there's no guarantee that one castor wheel body will work with another fixing. So we strongly recommend that you use the filter options on the left hand side of the list view page, to only view Castor + Fixing - then you'll know for sure that the fixing is compatible.

Each Castor has a Silver Insert and a Grey Rubber Rimmed Tyre, although the 80mm size also has a Nylon Rimmed option.  Different colours can be made to order subject to minimum quantity requirements and as a general rule, we offer this range of castors unassembled.  

We recommend that with all our castors you use the fittings we specify within this category as there's so many manufacturers out there of chair bases and sockets that you can't guarantee that all castors will be universal.  

We show standard colours & finishes where possible but these are constantly changing so if you require a colour not listed in the drop-down, speak to us as we may well have added it since.  

Submit a review  There are currently no reviews for this product. Why not submit a review?

Ask a question There are currently no FAQs for this product. Do you have a question? Submit FAQ

Customers also bought these items:

M8x28mm Threaded Pin for 60, 75 & 80mm Body's

From £0.12

In Stock

Zinc Plated