Pop Up Socket 3 Gang / 2 CAT Data / 2 USB & LED, Bright ChromeFlush Fitting - White Button
DID YOU KNOW?
The Bright Chrome Top Disc compliments the Two-Tone Black & Chrome surround and you just depress the white button to 'pop-up' the unit about 25-30mm - and then draw it into position. Adds that real wow factor to any kitchen, especially when used in conjunction with the flush fit adaptor ring, now supplied as standard!
This unit is predominantly manufactured from a quality Zamak (Metal) material and will enhance any kitchen, workspace or prestigious development, where power or data distribution is required. As with all our concealed sockets, we always recommend you get a tradesperson to install this unit.
Unit comes with flush fit adaptor ring in the box.
Useful Technical Data / All Pop Up Sockets now rated to to IP54
Approx. Column Height when fully extended, from top or worktop - TBA
Overall Outside Diameter of Top Plate with Depress Button - 120mm
Suggested Hole Size Required / See below but use a test template if in doubt
with flush fit adaptor ring (supplied) : 124mm
without flush fit adaptor ring : 100mm -0/+1mm
Thickness of Top when used without a 'Flush Fit' Adaptor - 7mm
Overall Diameter of Shoulder Washer that clamps under the worktop - 152mm
(this can be reduced down to as much as 110mm, if trimmed)
Approx. Depth required when retracted fully - TBA
(the depth required is measured from the TOP of the worktop & includes space for the wires/cables to exit the bottom of the unit, so worktop thickness can be taken off this figure.)
- 1 HIGH POWER LED BLUE: 3,6V, 1W, 350 mA, 18~22lm, estimated life: 100.000 h (approx. 10 years 24h/24h)
There are currently no reviews for this product. Why not submit a review?
Frequently asked questions about this item are shown below. Do you have a question? Submit FAQ
Q: Can you tell me what locks the socket post into the up position ? As the socket post I have at the moment keeps sliding down
A: Hello Simon, Our Milan range has latch mechanism at the bottom of the unit which holds it into place when fully extended. When not in use all you need to do is push the unit back down and the latch will allow the unit to be retracted back down. I hope this helps. If you have any other questions please don't hesitate to call or email us. Kind Regards , The BPF Web Team.
We thought these might also interest you :
EXTRA 25% Off